A live station turns merch into something guests watch get made. In Cleveland most of the work happens before the doors open, because the gear crosses the country by freight. Here's the order it goes in.
Weeks before
You send the logo or artwork and we proof it. Screens get burned and DTF transfers printed before anything ships, and fixed art locks about a week out. We confirm garments and sizes, lean toward hoodies and long sleeves in cold-weather season, and pick the stations that fit your run-of-show. Then the crates leave Fullerton.
On the day
- Load-in: the crew, who flew in the day before, meets the freight at your dock and builds each station in roughly 10×10 ft.
- Guests choose: a size, a garment, a design or a patch. Choosing is what makes people care about the piece.
- We print: up to 60 pieces an hour per press, and 100+ an hour from a standard two-press station.
- They wear it out: finished and still warm off the platen, about two minutes after they ordered.
What the venue provides
About 10×10 ft per station, two dedicated 120V circuits, a level floor and a line that doesn't block doors. A lakefront lot works too, with a weighted tent and a generator. The venue checklist has the details.
Picking a method
Big crowds and one design point to screen printing. Full color, names or short runs point to DTF. A hat bar or embroidery adds a premium station. Read how a station runs or tell us about your Cleveland event.
Cleveland planning
What we sort out before the crates ship
Every Cleveland job gets mapped before the freight leaves: the dock or door we'll use, which outlets are dedicated, where the line forms and where guests pick a size. That's what keeps a station tidy on the Huntington Convention Center floor, in a private room downtown or at a small activation near Rocket Arena.
Merch Troop runs out of a shop in Fullerton, California, 2,034 miles from Cleveland. The kit ships ahead by freight: presses, flash dryers, heat presses, blanks, folding tables and signage. Trained printers fly in a day early to meet it. Each station needs about 10×10 ft and two 120V circuits, and a two-press setup clears 100+ shirts an hour on a simple menu.